Structure and conductivity of AOT solutions in n-hexadecane-chloroform mixtures

The structure and conductivity of AOT (sodium bis(2-ethylhexyl) sulfosuccinate) solutions (2.5 × 10⁻⁴–2.5 × 10⁻¹ M) in n-hexadecane-chloroform mixture at the chloroform concentration from 50 to 100 vol% were studied. The diffusion ordered spectroscopy NMR study revealed that in the indicated range, the observed hydrodynamic diameter of micelles depends only on the AOT concentration and does not depend on the chloroform content. Molar fractions of free AOT molecules and those aggregated into micelles were calculated using the Lindman's law: at concentrations above 2.5 × 10⁻¹ М, the solutions contain mostly the micelles, whereas at concentrations below 2.5 × 10⁻⁴ M, the solutions contain AOT molecules. The transition region contains both the AOT molecules and the micelles. Conductivity measurements were used to determine free charge carriers in the bulk of solutions and their contributions to conductivity.     

Electric field induced non-linear multisubband electron mobility in V-shaped asymmetric double quantum well structure

ABSTRACT

We study the effect of the external electric field F_ext on the low-temperature electron mobility μ in an asymmetrically doped Al_xGa_1-xAs based V-shaped double quantum well (VDQW) structure. We show that nonlinearity of µ occurs under double subband occupancy on account of intersubband effects. The field F_ext alters the VDQW potential leading to transfer of subband wave functions between the wells, which affects the scattering potentials and hence μ. In the VDQW structure, due to the alloy channel layer, the alloy disorder (Al-) scattering happens to be significant along with the ionised impurity (Imp-) scattering. The non-linear behaviour of μ is because of μ^Imp, while the overall magnitude of μ is mostly due to μ^Al. The increase of difference in the doping concentrations of the outer barriers increases the nonlinearity of μ. The oscillatory character of μ is amended by varying the width of the well and barrier and also the height of the VDQW. Our results can be used to study VDQW based nanoscale field effect transistor structures.     

Nonlinear obstacle problems with double phase in the borderline case

In this paper we study a double phase problem with an irregular obstacle. The energy functional under consideration is characterized by the fact that both ellipticity and growth switch between a type of polynomial and a type of logarithm, which can be regarded as a borderline case of the double phase functional with $(p,q)$-growth. We obtain an optimal global Calderón–Zygmund type estimate for the obstacle problem with double phase in the borderline case.     

Modified layered bimetallic compound used as a novel adsorbent for the solid-phase extraction of monoaromatic hydrocarbons from water samples prior to gas chromatography–mass spectrometry

This study reports a promising method of solid-phase extraction for determining the toluene, ethylbenzene, p-xylene, m-xylene, o-xylene, 1,3,5-trimethylbenzene, and 1,2,4-trimethylbenzene in water samples by gas chromatography–mass spectrometry (GC–MS). Prior to this procedure, the magnesium–aluminum bimetallic hydroxides modified with sodium dodecylbenzenesulfonate (Mg/Al-SDBS-LDH) were prepared and served as the novel solid-phase extractant. The Mg/Al-SDBS-LDH has advantage of good hydrophobicity and larger spacing which facilitates the monoaromatic hydrocarbons (MAHCs) into the interlayer for adsorption. As a result, the seven MAHCs in 500 mL water samples were enriched greatly, and the theoretical enrichment factor reached to 125 times. Under the optimized conditions of solid-phase extraction (SPE) and GC–MS, the mass concentration of each MAHC (0.005–10, 0.01–10, or 0.05–10 ng/mL) had a fine linear relationship with peak area. The correlation coefficients were more than 0.995. The detection limits were between 0.001 and 0.01 ng/mL, and the RSD were between 3.1% and 6.6%. The method had been applied to determine the seven MAHCs in the Dongfengqu river water and laboratory wastewater of Chengdu University of Technology successfully.     

SCR performance enhancement of NiMnTi mixed oxides catalysts by regulating assembling methods of LDHs-Based precursor

A series of NiMnTi mixed metal oxides (Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO, NiMnTi-LDO) were synthesized via different assembling methods and evaluated in the selective catalytic reduction of NO_x with NH₃(NH₃-SCR). As the results presented, catalysts via diverse assembling methods of LDHs templates afforded different catalytic denitrification (DeNO_x) performance, which might be related to the exposure degree of active constituents and the interaction intensity between metal components. Noticeably, compared with Ni/Mn-TiO₂, Mn/NiTi-LDO and TiO₂/NiMn-LDO catalysts, the NiMnTi-LDO catalyst deriving from one step in-situ method NiMnTi-LDH precursor template exhibited the most desirable performance at temperature window of 150–360 °C in NH₃-SCR (above 90% NO_x conversion with 95% N₂ selectivity). The specific structure and property of samples were correlated by means of a series of characterizations, where the results indicated that NiMnTi-LDO possessed the highest surface area, the strongest redox ability, the most abundant acid amount and the best dispersion.     

Surface charging behaviors of electrocatalytic interfaces with partially charged chemisorbates

The surface charge is a key concept in electrochemistry. Mathematically, the surface charge is obtained from a spatial integration of the volume charge along a particular direction. Ambiguities thus arise in choosing the starting and ending points of the integration. As for electrocatalytic interfaces, the presence of chemisorbates further complicates the situation. In this minireview, I adopt a definition of the surface charge within a continuum picture of the electric double layer. I will introduce surface charging behaviors of firstly ordinary electrochemical interfaces and then electrocatalytic interfaces featuring partially charged chemisorbates. Particularly, the origin of nonmonotonic surface charging behaviors of electrocatalytic interfaces is explained using a primitive model. Finally, a brief account of previous studies on the nonmonotonic surface charging behavior is presented, as a subline of the spectacular history of electric double layer.     

“Confinement effects for nano-electrocatalysts for oxygen reduction reaction”

Oxygen reduction reaction (ORR) is one of the most technologically relevant reactions. It occurs at the interface of the electrocatalyst and electrolyte, where oxygen reacts with protons and electrons to produce water. Because the electrocatalyst is dispersed on a high surface area support, morphological confinement becomes critical, as it dictates proton and oxygen transport. Furthermore, confinement is induced by ionomer, ionic liquids (ILs), or molecular additives, and their impact on electrocatalyst reactivity and transport properties is currently not well understood. We present an overview of electrostatics and mass transport–induced confinement and zoom in into ILs and molecular additives and try to unravel how local confinement induced by them impacts ORR.     

Impedance Response of a Thin Film on an Electrode: Deciphering the Influence of the Double Layer Capacitance

The different contributions of the interfacial capacitance are identified in the case of passive materials or thin protective coatings deposited on the electrode surface. The method is based on a graphical analysis of the EIS results to determine both the passive-film capacitance in the high-frequency domain and the double-layer capacitance in the low-frequency domain. The proposed analysis is shown to be independent of the physicochemical origins of the frequency dispersion of the interfacial capacitances which results, from an analysis point of view of the experimental results, in the use of a constant-phase element However, for a correct evaluation of the thin-film properties such as its thickness, the high-frequency data must be corrected for the double-layer contribution. In particular, it is shown that if the double-layer capacitance gives a frequency-dispersed response, it is necessary to correct the high-frequency part for the double-layer constant-phase elements. This is first demonstrated on synthetic data and then used for the determination of the thickness of thin oxide film formed on Al in neutral pH solution.     

NHC‐Pd complex‐catalyzed double carbonylation of aryl iodides with secondary amines to α‐keto amides

A series of palladium–NHC compounds were prepared and their catalytic activity in the double carbonylation of aryl iodides to synthesize α‐keto amides were examined. Palladium complexes bearing mixed NHC–phosphine exhibited high efficiency for the double carbonylation reaction. The effects of different solvents, base, temperature, carbon monoxide (CO), pressure, various amine and aryl iodides were investigated. Both electron‐rich and electron‐deficient aryl iodides afforded the corresponding substituted α‐keto amides in moderate to good yields. A possible mechanism was also proposed. Copyright © 2013 John Wiley & Sons, Ltd.     

Synthesis and Characterization of Novel Liquid Crystalline Epoxy Resin with Low Melting Point

A liquid crystalline epoxy resin (LCE) having α-methylstilbene as a mesogenic unit and an ethylene-oxy unit as a spacer (DGE(C2-MS-C2)) was synthesized and characterized. DGE (C2-MS-C2) has a lower melting point (MP) compared to the diglycidylether of 4,4′-dihydroxy-α-methylstilbene (DGEDHMS). The curing of DGE (C2-MS-C2) with diaminodiphenylethane (DDEt) in a mesophase generated a liquid crystalline (LC) network, which have a more highly layered structure than DGEDHMS. The LC network showed extensively large fracture energy on a tensile test. Introducing spacers outside the mesogen unit promotes the mesogen unit to form a highly ordered structure, which enhances the versatility of LC epoxy resins.